{"title":"Evergreen Styrene Channels \u0026 Z Sections","description":"\u003ch2\u003eEvergreen Styrene Channels \u0026amp; Z Sections for Model Building\u003c\/h2\u003e\u003cp\u003eShop Evergreen Styrene Channels \u0026amp; Z Sections at MegaHobby for open-channel and offset Z-section styrene profiles. Compare the individual listings by item number and dimensions so the material you order matches the part you intend to build.\u003c\/p\u003e\u003ch3\u003eWhere this material fits\u003c\/h3\u003e\u003cp\u003eChannels are useful for tracks, rails, support members and industrial framing. Z sections create an offset step between two faces and can represent fabricated supports or siding-related trim.\u003c\/p\u003e\u003ch3\u003eChoosing the right item\u003c\/h3\u003e\u003cp\u003eCheck whether the listing is a regular channel or a Z section. Similar nominal dimensions do not make the profiles interchangeable.\u003c\/p\u003e\u003ch3\u003eFrom a drawing to a finished part\u003c\/h3\u003e\u003cp\u003eBegin with a measured sketch and identify which faces or edges will remain visible. Plan the cut layout so repeated components match, support the stock while working and dry-fit the assembly before bonding. Choose an adhesive for the actual material combination, then check a painted or finished sample on scrap before committing to the completed model. Keep useful offcuts for jigs, fit checks and small future repairs.\u003c\/p\u003e\u003cp\u003eThese materials can support several kinds of modeling, but the correct size depends on your scale and prototype. A part used as trim on one project may serve as a frame member on another. Use dimensions and reference drawings to make the choice rather than assuming a single profile has one fixed application.\u003c\/p\u003e\u003cp\u003eContinue with \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e, \u003ca href=\"\/collections\/evergreen-strip-styrene\"\u003eEvergreen Strip Styrene\u003c\/a\u003e, \u003ca href=\"\/collections\/evergreen-plain-white-sheets\"\u003eEvergreen Plain White Styrene Sheets\u003c\/a\u003e, or browse the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen collection\u003c\/a\u003e. Find more materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and workbench equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"evg5757","title":"Evergreen Z Channel Styrene Strip Economy Pack 14\"  35cm -- .250\"  6.3mm pkg(10)","description":"\u003ch2\u003eEvergreen Z Channel Styrene Strip Economy Pack 14\"  35cm -- .250\"  6.3mm pkg(10)\u003c\/h2\u003e\u003cp\u003eEvergreen 5757 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003eZ Channel Styrene Strip Economy Pack 14\"  35cm -- .250\"  6.3mm pkg(10)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG5757\u003c\/li\u003e\n\u003cli\u003eProduct selection: Z Channel Styrene Strip Economy Pack 14\"  35cm -- .250\"  6.3mm pkg(10)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893960933450,"sku":"EVG5757","price":14.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/Evergreen_B-C_Front-2_b531b9aa-6a95-4e4a-90ce-397eb0ba5312.jpg?v=1793733740"},{"product_id":"evg5756","title":"Evergreen Z Channel Styrene Strip Economy Pack 14\"  35cm -- .188\"  4.8mm pkg(15)","description":"\u003ch2\u003eEvergreen Z Channel Styrene Strip Economy Pack 14\"  35cm -- .188\"  4.8mm pkg(15)\u003c\/h2\u003e\u003cp\u003eEvergreen 5756 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003eZ Channel Styrene Strip Economy Pack 14\"  35cm -- .188\"  4.8mm pkg(15)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG5756\u003c\/li\u003e\n\u003cli\u003eProduct selection: Z Channel Styrene Strip Economy Pack 14\"  35cm -- .188\"  4.8mm pkg(15)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893960966218,"sku":"EVG5756","price":16.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/Evergreen_B-C_Front-2_79746b77-570b-48dd-a433-c4f2a9fade70.jpg?v=1793733742"},{"product_id":"evg5755","title":"Evergreen Z Channel Styrene Strip Economy Pack 14\"  35cm -- .156\"  4mm pkg(15)","description":"\u003ch2\u003eEvergreen Z Channel Styrene Strip Economy Pack 14\"  35cm -- .156\"  4mm pkg(15)\u003c\/h2\u003e\u003cp\u003eEvergreen 5755 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003eZ Channel Styrene Strip Economy Pack 14\"  35cm -- .156\"  4mm pkg(15)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG5755\u003c\/li\u003e\n\u003cli\u003eProduct selection: Z Channel Styrene Strip Economy Pack 14\"  35cm -- .156\"  4mm pkg(15)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893960998986,"sku":"EVG5755","price":16.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/Evergreen_B-C_Front-2_8de5bc23-ae73-4f4b-865a-920f4b2c427c.jpg?v=1793733744"},{"product_id":"evg5754","title":"Evergreen Z Channel Styrene Strip Economy Pack 14\"  35cm -- .125\"  3.2mm pkg(15)","description":"\u003ch2\u003eEvergreen Z Channel Styrene Strip Economy Pack 14\"  35cm -- .125\"  3.2mm pkg(15)\u003c\/h2\u003e\u003cp\u003eEvergreen 5754 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003eZ Channel Styrene Strip Economy Pack 14\"  35cm -- .125\"  3.2mm pkg(15)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG5754\u003c\/li\u003e\n\u003cli\u003eProduct selection: Z Channel Styrene Strip Economy Pack 14\"  35cm -- .125\"  3.2mm pkg(15)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893961130058,"sku":"EVG5754","price":16.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/Evergreen_B-C_Front-2_bc1ce747-2d7e-415d-9cfd-bb78ce2820de.jpg?v=1793733745"},{"product_id":"evg5753","title":"Evergreen Z Channel Styrene Strip Economy Pack 14\"  35cm -- .100\"  2.5mm pkg(20)","description":"\u003ch2\u003eEvergreen Z Channel Styrene Strip Economy Pack 14\"  35cm -- .100\"  2.5mm pkg(20)\u003c\/h2\u003e\u003cp\u003eEvergreen 5753 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003eZ Channel Styrene Strip Economy Pack 14\"  35cm -- .100\"  2.5mm pkg(20)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG5753\u003c\/li\u003e\n\u003cli\u003eProduct selection: Z Channel Styrene Strip Economy Pack 14\"  35cm -- .100\"  2.5mm pkg(20)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893961162826,"sku":"EVG5753","price":16.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/Evergreen_B-C_Front-2_32616d26-ce89-41fb-aeb8-47c6656d8c4c.jpg?v=1793733747"},{"product_id":"evg5752","title":"Evergreen Z Channel Styrene Strip Economy Pack 14\"  35cm -- .080\"  2mm pkg(20)","description":"\u003ch2\u003eEvergreen Z Channel Styrene Strip Economy Pack 14\"  35cm -- .080\"  2mm pkg(20)\u003c\/h2\u003e\u003cp\u003eEvergreen 5752 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003eZ Channel Styrene Strip Economy Pack 14\"  35cm -- .080\"  2mm pkg(20)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG5752\u003c\/li\u003e\n\u003cli\u003eProduct selection: Z Channel Styrene Strip Economy Pack 14\"  35cm -- .080\"  2mm pkg(20)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893961195594,"sku":"EVG5752","price":16.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/Evergreen_B-C_Front-2_356abc4b-6b3b-488f-a4de-a2660c7885e3.jpg?v=1793733750"},{"product_id":"evg5751","title":"Evergreen Z Channel Styrene Strip Economy Pack 14\"  35cm -- .060\"  1.5mm pkg(20)","description":"\u003ch2\u003eEvergreen Z Channel Styrene Strip Economy Pack 14\"  35cm -- .060\"  1.5mm pkg(20)\u003c\/h2\u003e\u003cp\u003eEvergreen 5751 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003eZ Channel Styrene Strip Economy Pack 14\"  35cm -- .060\"  1.5mm pkg(20)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG5751\u003c\/li\u003e\n\u003cli\u003eProduct selection: Z Channel Styrene Strip Economy Pack 14\"  35cm -- .060\"  1.5mm pkg(20)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893961228362,"sku":"EVG5751","price":16.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/Evergreen_B-C_Front-2_a00a0111-8deb-4db9-9a63-e81bc3b367cd.jpg?v=1793733752"},{"product_id":"evg757","title":"Evergreen Z Channel Styrene Strips 14\"  35cm -- .250\"  6.3mm pkg(2)","description":"\u003ch2\u003eEvergreen Z Channel Styrene Strips 14\"  35cm -- .250\"  6.3mm pkg(2)\u003c\/h2\u003e\u003cp\u003eEvergreen 757 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003eZ Channel Styrene Strips 14\"  35cm -- .250\"  6.3mm pkg(2)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG757\u003c\/li\u003e\n\u003cli\u003eProduct selection: Z Channel Styrene Strips 14\"  35cm -- .250\"  6.3mm pkg(2)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893965783114,"sku":"EVG757","price":4.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/Evergreen_B-C_Front-2_331247b6-2042-4a40-ac3a-a94585912661.jpg?v=1793733901"},{"product_id":"evg756","title":"Evergreen Z Channel Styrene Strips 14\"  35cm -- .188\"  4.8mm pkg(3)","description":"\u003ch2\u003eEvergreen Z Channel Styrene Strips 14\"  35cm -- .188\"  4.8mm pkg(3)\u003c\/h2\u003e\u003cp\u003eEvergreen 756 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003eZ Channel Styrene Strips 14\"  35cm -- .188\"  4.8mm pkg(3)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG756\u003c\/li\u003e\n\u003cli\u003eProduct selection: Z Channel Styrene Strips 14\"  35cm -- .188\"  4.8mm pkg(3)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893965815882,"sku":"EVG756","price":4.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/Evergreen_B-C_Front-2_841435af-1af2-46d1-a0fe-cddea8aa4f25.jpg?v=1793733903"},{"product_id":"evg755","title":"Evergreen .156'' Z CHANNEL (3)","description":"\u003ch2\u003eEvergreen .156'' Z CHANNEL (3)\u003c\/h2\u003e\u003cp\u003eEvergreen 755 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003e.156'' Z CHANNEL (3)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG755\u003c\/li\u003e\n\u003cli\u003eProduct selection: .156'' Z CHANNEL (3)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893965848650,"sku":"EVG755","price":4.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/46592933122215_d4602053-9c0b-4364-a42e-2f00dd6f19f1.jpg?v=1793733904"},{"product_id":"evg754","title":"Evergreen .125'' Z CHANNEL (3)","description":"\u003ch2\u003eEvergreen .125'' Z CHANNEL (3)\u003c\/h2\u003e\u003cp\u003eEvergreen 754 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003e.125'' Z CHANNEL (3)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG754\u003c\/li\u003e\n\u003cli\u003eProduct selection: .125'' Z CHANNEL (3)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893965881418,"sku":"EVG754","price":4.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/46592933122203.jpg?v=1793733907"},{"product_id":"evg753","title":"Evergreen Z Channel Styrene Strips 14\"  35cm -- .100\"  2.5mm pkg(4)","description":"\u003ch2\u003eEvergreen Z Channel Styrene Strips 14\"  35cm -- .100\"  2.5mm pkg(4)\u003c\/h2\u003e\u003cp\u003eEvergreen 753 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003eZ Channel Styrene Strips 14\"  35cm -- .100\"  2.5mm pkg(4)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG753\u003c\/li\u003e\n\u003cli\u003eProduct selection: Z Channel Styrene Strips 14\"  35cm -- .100\"  2.5mm pkg(4)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893965914186,"sku":"EVG753","price":4.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/Evergreen_B-C_Front-2_da05551d-8925-40f1-bc0c-08f9bd73ea8b.jpg?v=1793733909"},{"product_id":"evg752","title":"Evergreen Z Channel Styrene Strips 14\"  35cm -- .080\"  2mm pkg(4)","description":"\u003ch2\u003eEvergreen Z Channel Styrene Strips 14\"  35cm -- .080\"  2mm pkg(4)\u003c\/h2\u003e\u003cp\u003eEvergreen 752 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003eZ Channel Styrene Strips 14\"  35cm -- .080\"  2mm pkg(4)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG752\u003c\/li\u003e\n\u003cli\u003eProduct selection: Z Channel Styrene Strips 14\"  35cm -- .080\"  2mm pkg(4)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893965946954,"sku":"EVG752","price":4.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/Evergreen_B-C_Front-2_eacf889a-bc37-43b6-b22f-38acbf4b4aab.jpg?v=1793733910"},{"product_id":"evg751","title":"Evergreen Z Channel Styrene Strips 14\"  35cm -- .060\"  1.5mm pkg(4)","description":"\u003ch2\u003eEvergreen Z Channel Styrene Strips 14\"  35cm -- .060\"  1.5mm pkg(4)\u003c\/h2\u003e\u003cp\u003eEvergreen 751 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003eZ Channel Styrene Strips 14\"  35cm -- .060\"  1.5mm pkg(4)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG751\u003c\/li\u003e\n\u003cli\u003eProduct selection: Z Channel Styrene Strips 14\"  35cm -- .060\"  1.5mm pkg(4)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893966241866,"sku":"EVG751","price":4.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/Evergreen_B-C_Front-2_25d29f81-f4eb-4523-afe8-98afcee85d73.jpg?v=1793733912"},{"product_id":"evg268","title":"Evergreen .312'' (5\/16)  Channel  (3)","description":"\u003ch2\u003eEvergreen .312'' (5\/16)  Channel  (3)\u003c\/h2\u003e\u003cp\u003eEvergreen 268 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003e.312'' (5\/16)  Channel  (3)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG268\u003c\/li\u003e\n\u003cli\u003eProduct selection: .312'' (5\/16)  Channel  (3)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893973549130,"sku":"EVG268","price":4.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/Evergreen_B-C_Front-2_480cb17d-92cb-441e-bf22-9ed59a6c7a01.jpg?v=1793734114"},{"product_id":"evg267","title":"Evergreen .250'' (1\/4)  Channel  (3)","description":"\u003ch2\u003eEvergreen .250'' (1\/4)  Channel  (3)\u003c\/h2\u003e\u003cp\u003eEvergreen 267 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003e.250'' (1\/4)  Channel  (3)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG267\u003c\/li\u003e\n\u003cli\u003eProduct selection: .250'' (1\/4)  Channel  (3)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893973581898,"sku":"EVG267","price":4.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/Evergreen_B-C_Front-2_f1cfa78c-45d0-4666-a4f6-db5b4c30c57f.jpg?v=1793734116"},{"product_id":"evg266","title":"Evergreen .188'' (3\/16)  Channel  (3)","description":"\u003ch2\u003eEvergreen .188'' (3\/16)  Channel  (3)\u003c\/h2\u003e\u003cp\u003eEvergreen 266 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003e.188'' (3\/16)  Channel  (3)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG266\u003c\/li\u003e\n\u003cli\u003eProduct selection: .188'' (3\/16)  Channel  (3)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893973680202,"sku":"EVG266","price":4.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/Evergreen_B-C_Front-2_30d946dd-1eec-4b90-80e2-5092746df873.jpg?v=1793734118"},{"product_id":"evg265","title":"Evergreen .156'' (5\/32)  Channel  (4)","description":"\u003ch2\u003eEvergreen .156'' (5\/32)  Channel  (4)\u003c\/h2\u003e\u003cp\u003eEvergreen 265 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003e.156'' (5\/32)  Channel  (4)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG265\u003c\/li\u003e\n\u003cli\u003eProduct selection: .156'' (5\/32)  Channel  (4)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893973712970,"sku":"EVG265","price":4.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/Evergreen_B-C_Front-2_9d0c71af-b8e2-4808-bdb0-d04de78ab496.jpg?v=1793734119"},{"product_id":"evg264","title":"Evergreen .125'' (1\/8)  Channel  (4)","description":"\u003ch2\u003eEvergreen .125'' (1\/8)  Channel  (4)\u003c\/h2\u003e\u003cp\u003eEvergreen 264 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003e.125'' (1\/8)  Channel  (4)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG264\u003c\/li\u003e\n\u003cli\u003eProduct selection: .125'' (1\/8)  Channel  (4)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893973778506,"sku":"EVG264","price":4.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/Evergreen_B-C_Front-2_e2ec53d7-0c24-434c-be92-811685242f35.jpg?v=1793734121"},{"product_id":"evg263","title":"Evergreen .100''  Channel  (4)","description":"\u003ch2\u003eEvergreen .100''  Channel  (4)\u003c\/h2\u003e\u003cp\u003eEvergreen 263 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003e.100''  Channel  (4)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG263\u003c\/li\u003e\n\u003cli\u003eProduct selection: .100''  Channel  (4)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893973811274,"sku":"EVG263","price":4.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/Evergreen_B-C_Front-2_33cfe851-10d0-4b55-b270-a91adc8c240f.jpg?v=1793734122"},{"product_id":"evg262","title":"Evergreen .080''  Channel  (4)","description":"\u003ch2\u003eEvergreen .080''  Channel  (4)\u003c\/h2\u003e\u003cp\u003eEvergreen 262 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003e.080''  Channel  (4)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG262\u003c\/li\u003e\n\u003cli\u003eProduct selection: .080''  Channel  (4)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893973844042,"sku":"EVG262","price":4.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/Evergreen_B-C_Front-2_c1345ad2-5367-48c9-b498-c4bdb5fbdb3f.jpg?v=1793734124"},{"product_id":"evg261","title":"Evergreen .060''  Channel  (4)","description":"\u003ch2\u003eEvergreen .060''  Channel  (4)\u003c\/h2\u003e\u003cp\u003eEvergreen 261 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003e.060''  Channel  (4)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG261\u003c\/li\u003e\n\u003cli\u003eProduct selection: .060''  Channel  (4)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893973876810,"sku":"EVG261","price":4.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/46592933122848.jpg?v=1793734126"}],"url":"https:\/\/megahobby.com\/collections\/evergreen-channels.oembed","provider":"Mega Hobby","version":"1.0","type":"link"}