{"title":"Evergreen Styrene T Shapes","description":"\u003ch2\u003eEvergreen Styrene T Shapes for Model Building\u003c\/h2\u003e\u003cp\u003eShop Evergreen Styrene T Shapes at MegaHobby for T-section styrene profiles for raised and exposed detail. Compare the individual listings by item number and dimensions so the material you order matches the part you intend to build.\u003c\/p\u003e\u003ch3\u003eWhere this material fits\u003c\/h3\u003e\u003cp\u003eT shapes can reproduce stiffeners, flanged edges and lightweight fabricated supports. The stem and flange create relief that would otherwise require joining two separate strips.\u003c\/p\u003e\u003ch3\u003eChoosing the right item\u003c\/h3\u003e\u003cp\u003eRead the named section size and any additional dimensions in the listing. Decide which face will be visible before cutting parts to length.\u003c\/p\u003e\u003ch3\u003eFrom a drawing to a finished part\u003c\/h3\u003e\u003cp\u003eBegin with a measured sketch and identify which faces or edges will remain visible. Plan the cut layout so repeated components match, support the stock while working and dry-fit the assembly before bonding. Choose an adhesive for the actual material combination, then check a painted or finished sample on scrap before committing to the completed model. Keep useful offcuts for jigs, fit checks and small future repairs.\u003c\/p\u003e\u003cp\u003eThese materials can support several kinds of modeling, but the correct size depends on your scale and prototype. A part used as trim on one project may serve as a frame member on another. Use dimensions and reference drawings to make the choice rather than assuming a single profile has one fixed application.\u003c\/p\u003e\u003cp\u003eContinue with \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e, \u003ca href=\"\/collections\/evergreen-strip-styrene\"\u003eEvergreen Strip Styrene\u003c\/a\u003e, \u003ca href=\"\/collections\/evergreen-plain-white-sheets\"\u003eEvergreen Plain White Styrene Sheets\u003c\/a\u003e, or browse the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen collection\u003c\/a\u003e. Find more materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and workbench equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"evg769","title":"Evergreen .321 T SHAPE (2)","description":"\u003ch2\u003eEvergreen .321 T SHAPE (2)\u003c\/h2\u003e\u003cp\u003eEvergreen 769 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003e.321 T SHAPE (2)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG769\u003c\/li\u003e\n\u003cli\u003eProduct selection: .321 T SHAPE (2)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePackaged 14\" 35.6cm strips have a \"T\" cross section. Easily bonded with all styrene-compatible solvent cements or CA glues. Molded in white.\u003c\/p\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893965226058,"sku":"EVG769","price":4.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/46592933122374.jpg?v=1793733885"},{"product_id":"evg768","title":"Evergreen 14\" Styrene T-Beam\/Column -- .257 x .085\" pkg(2)","description":"\u003ch2\u003eEvergreen 14\" Styrene T-Beam\/Column -- .257 x .085\" pkg(2)\u003c\/h2\u003e\u003cp\u003eEvergreen 768 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003e14\" Styrene T-Beam\/Column -- .257 x .085\" pkg(2)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG768\u003c\/li\u003e\n\u003cli\u003eProduct selection: 14\" Styrene T-Beam\/Column -- .257 x .085\" pkg(2)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893965258826,"sku":"EVG768","price":4.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/Evergreen_B-C_Front-2_d2873c39-97bd-4162-ad9b-f17e9df87121.jpg?v=1793733887"},{"product_id":"evg767","title":"Evergreen .198 T SHAPE (3)","description":"\u003ch2\u003eEvergreen .198 T SHAPE (3)\u003c\/h2\u003e\u003cp\u003eEvergreen 767 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003e.198 T SHAPE (3)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG767\u003c\/li\u003e\n\u003cli\u003eProduct selection: .198 T SHAPE (3)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePackaged 14\" 35.6cm strips have a \"T\" cross section. Easily bonded with all styrene-compatible solvent cements or CA glues. Molded in white.\u003c\/p\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893965291594,"sku":"EVG767","price":4.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/46592933122350_a0d69eb6-fe0f-416f-94fe-77160e4e4402.jpg?v=1793733889"},{"product_id":"evg766","title":"Evergreen 14\" Styrene T-Beam\/Column -- .141 x .046\" pkg(3)","description":"\u003ch2\u003eEvergreen 14\" Styrene T-Beam\/Column -- .141 x .046\" pkg(3)\u003c\/h2\u003e\u003cp\u003eEvergreen 766 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003e14\" Styrene T-Beam\/Column -- .141 x .046\" pkg(3)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG766\u003c\/li\u003e\n\u003cli\u003eProduct selection: 14\" Styrene T-Beam\/Column -- .141 x .046\" pkg(3)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893965357130,"sku":"EVG766","price":4.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/Evergreen_B-C_Front-2_4da5a9f6-0825-4a8b-9b27-f26727143249.jpg?v=1793733891"},{"product_id":"evg765","title":"Evergreen 14\" Styrene T-Beam\/Column -- .123 x .040\" pkg(3)","description":"\u003ch2\u003eEvergreen 14\" Styrene T-Beam\/Column -- .123 x .040\" pkg(3)\u003c\/h2\u003e\u003cp\u003eEvergreen 765 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003e14\" Styrene T-Beam\/Column -- .123 x .040\" pkg(3)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG765\u003c\/li\u003e\n\u003cli\u003eProduct selection: 14\" Styrene T-Beam\/Column -- .123 x .040\" pkg(3)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893965488202,"sku":"EVG765","price":4.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/Evergreen_B-C_Front-2_0bad309e-674d-4eaa-ac4a-2f42306c7372.jpg?v=1793733892"},{"product_id":"evg764","title":"Evergreen 14\" Styrene T-Beam\/Column -- .092 x .030\" pkg(4)","description":"\u003ch2\u003eEvergreen 14\" Styrene T-Beam\/Column -- .092 x .030\" pkg(4)\u003c\/h2\u003e\u003cp\u003eEvergreen 764 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003e14\" Styrene T-Beam\/Column -- .092 x .030\" pkg(4)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG764\u003c\/li\u003e\n\u003cli\u003eProduct selection: 14\" Styrene T-Beam\/Column -- .092 x .030\" pkg(4)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893965520970,"sku":"EVG764","price":4.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/Evergreen_B-C_Front-2_3bee2679-8945-4edc-aa1a-6ddd51577f89.jpg?v=1793733894"},{"product_id":"evg763","title":"Evergreen 14\" Styrene T-Beam\/Column -- .073 x .024\" pkg(4)","description":"\u003ch2\u003eEvergreen 14\" Styrene T-Beam\/Column -- .073 x .024\" pkg(4)\u003c\/h2\u003e\u003cp\u003eEvergreen 763 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003e14\" Styrene T-Beam\/Column -- .073 x .024\" pkg(4)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG763\u003c\/li\u003e\n\u003cli\u003eProduct selection: 14\" Styrene T-Beam\/Column -- .073 x .024\" pkg(4)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893965553738,"sku":"EVG763","price":4.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/Evergreen_B-C_Front-2_3532b8f5-557c-4663-8ab5-928542b5da89.jpg?v=1793733896"},{"product_id":"evg762","title":"Evergreen 14\" Styrene T-Beam\/Column -- .056 x .019\" pkg(4)","description":"\u003ch2\u003eEvergreen 14\" Styrene T-Beam\/Column -- .056 x .019\" pkg(4)\u003c\/h2\u003e\u003cp\u003eEvergreen 762 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003e14\" Styrene T-Beam\/Column -- .056 x .019\" pkg(4)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG762\u003c\/li\u003e\n\u003cli\u003eProduct selection: 14\" Styrene T-Beam\/Column -- .056 x .019\" pkg(4)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893965586506,"sku":"EVG762","price":4.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/Evergreen_B-C_Front-2_a2c77858-50b3-467c-ae88-f36942624ba8.jpg?v=1793733898"},{"product_id":"evg761","title":"Evergreen 14\" Styrene T-Beam\/Column -- .035 x .012\" pkg(4)","description":"\u003ch2\u003eEvergreen 14\" Styrene T-Beam\/Column -- .035 x .012\" pkg(4)\u003c\/h2\u003e\u003cp\u003eEvergreen 761 is styrene structural profile for scratch building and model detailing. This listing is for \u003cstrong\u003e14\" Styrene T-Beam\/Column -- .035 x .012\" pkg(4)\u003c\/strong\u003e. Match the section or pattern to your drawing before choosing the material for a new part.\u003c\/p\u003e\u003ch3\u003eIdeas for your workbench\u003c\/h3\u003e\u003cp\u003eUse the shaped section for exposed framing, brackets, stiffeners or miniature supports. The recognizable profile adds depth where the side or end of a fabricated member will remain visible. Repeating the same section can help an industrial model look consistent.\u003c\/p\u003e\u003ch3\u003eChoose the right size and format\u003c\/h3\u003e\u003cp\u003eChoose the cross-section first, then its dimensions. Angles, channels, I-beams, H-columns and T shapes are different profiles. Keep repeated pieces aligned with a drawing or jig during assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrand: Evergreen\u003c\/li\u003e\n\u003cli\u003eItem number: EVG761\u003c\/li\u003e\n\u003cli\u003eProduct selection: 14\" Styrene T-Beam\/Column -- .035 x .012\" pkg(4)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and finishing\u003c\/h3\u003e\u003cp\u003eMeasure and mark the part before cutting, support the material on a suitable work surface and dry-fit the assembly. Use an adhesive appropriate for the materials being joined and test it on an offcut. Clean up cut edges before applying a compatible finish; a small test piece helps confirm the appearance before painting the completed model.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/evergreen-structural-shapes\"\u003eEvergreen Styrene Structural Shapes\u003c\/a\u003e or return to the \u003ca href=\"\/collections\/evergreen\"\u003ecomplete Evergreen range at MegaHobby\u003c\/a\u003e. Find more project materials in \u003ca href=\"\/collections\/scratch-building\"\u003eScratch Building\u003c\/a\u003e and joining or cutting equipment in \u003ca href=\"\/collections\/tools-supplies\"\u003eTools \u0026amp; Supplies\u003c\/a\u003e.\u003c\/p\u003e","brand":"Evergreen","offers":[{"title":"Default Title","offer_id":67893965750346,"sku":"EVG761","price":4.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0565\/3066\/5546\/files\/Evergreen_B-C_Front-2_62de2910-45fc-4066-a3cb-3110a9c7e732.jpg?v=1793733899"}],"url":"https:\/\/megahobby.com\/collections\/evergreen-t-shapes.oembed","provider":"Mega Hobby","version":"1.0","type":"link"}