Be iZZi Riveter 0.55mm Single ASKBI055S

The Be iZZi 0.55 mm single riveter is a hand tool for adding or restoring repeated rivet impressions on scale models. Available from MegaHobby, it helps you carry surface detail across a repaired seam or develop a rivet pattern on an aircraft modeling project. The listed 0.55 mm dimension identifies the rivet pitch, rather than the wheel diameter.

Single-wheel surface detailing

The single-wheel arrangement lets you work along an individual rivet line. It is useful when laying out separate rows or restoring detail in a localized area after sanding. Choose the spacing by comparing the effect with your model and references; one pitch is not automatically correct for every subject at a given scale.

• Brand: Be iZZi
• Item: ASKBI055S
• Configuration: single wheel
• Listed rivet pitch: 0.55 mm
• Hardened-steel wheel and 3D-printed handle
• Manufactured and assembled in the Czech Republic

Plan the rivet pattern before working

Mark the intended rows lightly and test the tool on spare material before touching the model. Work with controlled pressure and support the surface so it does not flex unexpectedly. Check the appearance of the impressions under your intended primer and paint finish before committing to an entire airframe.

For aircraft, use photographs or drawings of the specific subject to guide the layout. A restrained pattern can complement panel lines and weathering without covering every surface in equally prominent marks. Where seams have been filled, let the repair material cure and level the surface before restoring detail.

Compare Be iZZi tools at MegaHobby

Browse Be iZZi riveter tools and compare single-wheel riveters. Explore model aircraft, find more modeling tools and supplies, and choose finishing materials in the MegaHobby Paint Store.